With the right cutter it was pretty easy.
Wednesday, June 10, 2020
Rudder work
Because I am using a solid word rudder I had to slot for the up/downhaul line.
With the right cutter it was pretty easy.
Then to drill holes for the end knots in the lines;
Putting final epoxy coats on the rudder pieces also;
With the right cutter it was pretty easy.
Friday, June 5, 2020
Slow process of fairing out the hull.
Setting bolts for gudgeons. Once again making sure everything is lined up with some allthread;
Laminated tiller had to be done in two pieces and joined because of shaping tool limitations.
Also glued together rudder box
then on to finishing all parts
Waiting for a cutter for my router to cut the control line slot in the rudder, but still have plenty to keep me busy on the hull finishing.
Setting bolts for gudgeons. Once again making sure everything is lined up with some allthread;
Laminated tiller had to be done in two pieces and joined because of shaping tool limitations.
Also glued together rudder box
then on to finishing all parts
Waiting for a cutter for my router to cut the control line slot in the rudder, but still have plenty to keep me busy on the hull finishing.
Subscribe to:
Posts
(
Atom
)